^41.T. S. Srivatsan, S. Sriram, D. Veeraraghavan and V. K. Vasudevan, “Microstructure, Tensile Properties and Fracture Behavior of Aluminum Alloy 7055,” J. Mater. Sci., 32, 2883-2894 (1997).

42.      ^*T. S. Srivatsan, S. Anand, V. K. Vasudevan and D. Veeraaraghavan,   “Tensile Response and Fracture Behavior of Al-Zn-Mg-Cu Alloy,” J. Mater. Engr.  & Performance, 6(3), 349-358 (1997).

43.      ^*V. K. Vasudevan, J. Yang and A. P. Woodfield, “On the b to B2 Ordering Temperature in a Ti-22Al-26Nb Orthorhombic Titanium Aluminide,” Scripta Mater., 35, pp. 1033-1039 (1996).

44.      ^*M. Kumar and V. K. Vasudevan, “Mechanical Properties and Strengthening of a Ni-25Mo-8Cr Alloy Containing Ni₂(Mo,Cr) Precipitates,” Acta Mater.,  44, pp. 4865-4880 (1996).

45.      ^*M. Kumar and V. K. Vasudevan, “Deformation-Induced Pseudo-Twinning and a New Superstructure in Ni₂Mo Precipitates Contained in an Ni-25Mo-8Cr Alloy,” Acta Mater., 44, pp. 3575-3583  (1996).

46.      ^*M. Kumar and V. K. Vasudevan, “Ordering Reactions in an Ni-25Mo-8Cr Alloy,” Acta Mater., 44, pp.1591-1600 (1996).

47.      ^*P. Wang, D. Veeraraghavan and V. K. Vasudevan, “Observation of Twins in the ₂ Phase in a Quenched Ti-46.54 At.% Al Alloy,” Scripta Mater., 34, pp. 1601-1607 (1996).

48.      ^*G. B. Viswanathan and V. K. Vasudevan, “Processing, Microstructure and Tensile Properties of a Ti-48 At.% Al Alloy,” Scripta Metall. Mater.,  32, pp. 1705-1711 (1995).

49.      ^*S. Sriram, V. K. Vasudevan and D. M. Dimiduk, “Dislocation Structures and Deformation Behavior of Ti-50/52Al Alloys Between 77-1273°K,” Mater. Sci. Engg.,  A192/193, pp. 217-225 (1995).

50.      M. A. Stucke, V. K. Vasudevan and D. M. Dimiduk, “Deformation Behavior of [001] Ti-56Al Single Crystals,” Mater. Sci. Engg.,  A192/193, pp. 111-119 (1995).

51.      ^*D. Veeraraghavan and V. K. Vasudevan, “Phase Transformations in Two-Phase TiAl/Ti₃Al Alloys During Continuous Heating and Cooling Studied by Electrical Resistivity Measurements,” Mater. Sci. Engg., A192/193, pp. 950-956 (1995).

52.      ^*T. S. Srivatsan, P. Kumar and V. K. Vasudevan,” “Tensile Deformation and Fracture Behavior of 7150 Aluminum Alloy,” Metals, Materials and Processes,  6(2), pp. 97-106 (1994).

53.      ^*S. S. Yang and V. K. Vasudevan, “Deformation Structures in Cold Rolled Nb-(10-16) At.% Al Solid Solution Alloys,” Scripta Metall. Mater.,  31, pp. 879-884 (1994).

54.      V. K. Vasudevan, E. E. Stansbury and  C. R. Brooks, “Domain Coarsening at Grain Boundaries in Ordered Ni₄Mo,” Acta Metall. Mater.,  40, pp. 2113-2122 (1992).

55.      ^*P. Wang and V. K. Vasudevan, “Composition Dependence of the Massive Transformation from a to g in Quenched TiAl Alloys,” Scripta Metall. et Mater.,  27, pp. 89-94 (1992).

56.      ^*P. Wang, G. B. Viswanathan  and V. K. Vasudevan, “Observation of a Massive Transformation from a to g in Quenched Ti-48 At Pct Al Alloys,” Metall. Trans.,  23A, pp. 690-697 (1992).

57.      R. Wheeler, V. K. Vasudevan and H. L. Fraser, “Factors Influencing the Deformation Mechanisms in the Intermetallic Compounds Al₃Ti and Al₃V,” Philos. Mag. Letters,  62,  pp. 143-151 (1990).

58.      S. A. Court, V.K. Vasudevan and  H. L. Fraser, “Deformation Mechanisms in the Intermetallic Compound TiAl,” Philos. Mag. A,  61, pp. 141-158 (1990).

59.      V. K. Vasudevan, S. J. Kim and C. M. Wayman, “Precipitation Reactions and Strengthening Mechanisms in Maraging Steels,” Metall. Trans.,  21A, pp. 2655-2668 (1990).

60.      V. K. Vasudevan, M. A.Stucke, S. A. Court and H. L. Fraser, “The Influence of Second Phase Ti₃Al on the Deformation Mechanisms in TiAl,” Philos. Mag. Letters,  59, pp. 299-307 (1989).

61.      V. K. Vasudevan, S. A. Court, P. Kurath and H. L. Fraser, “The Effect of Purity on the Deformation Mechanisms in the Intermetallic Compound TiAl,” Scripta Metall., 23, pp. 907-912  (1989).

62.      V. K. Vasudevan, S. A. Court, P. Kurath and H. L. Fraser, “The Effect of Grain Size and Temperature on the Yield Stress of the Intermetallic Compound TiAl,” Scripta Metall.,  23, pp. 467-469 (1989).

63.      V. K. Vasudevan and E. E. Stansbury, “Formation Mechanism of Ni₃Mo at Low Temperatures in Ternary  Ni₄Mo-Cr Alloys,” Philos. Mag. Letters,  60, pp. 269-275 (1989).

64.      V. K. Vasudevan, H. P. Kao, C. R. Brooks and E. E. Stansbury, “Kinetics of Domain Growth in Ordered Ni₄Mo,” Metall. Trans.,  19A, pp. 941-952 (1988).

65.      V. K. Vasudevan and H. L. Fraser, “The Microstructures of Rapidly Solidified and Heat-treated Al-8Fe-2Mo-Si Alloys,” Mater. Sci. Eng.,  98, pp. 131-136 (1988).

66.      V. K. Vasudevan and H. L. Fraser, “Identification of Precipitates in Rapidly Solidified and Heat-treated Al-8Fe-2Mo-Si Alloys,” Scripta Metall.,  21, pp. 1105-1110 (1987).

67.      V. K. Vasudevan and E. E. Stansbury, “Influence of Chromium on Ordering of Ni₄Mo,” Scripta. Metall., 19, pp. 1105-1110 (1985).

68.      V. K. Vasudevan, D. Saigal and T. S. Ananthanarayanan, “Carbon Sands in Foundry,” Annual J. Soc. Met. Engrs., Indian Institute of Technology, Kharagpur, India (1978-79).

69.      V. K. Vasudevan, “The Role of the Metallurgist–a View,” Annual J. Soc. Met. Engrs., Indian Institute of Technology, Kharagpur, India  (1977-78).

PREVIOUS        NEXT